HPoxy 1290 ZR- Zinc Rich Epoxy primer is A two-pack, polyamine-cured epoxy Primer with high metallic zinc powder, it provides a tough resistant coating with excellent mechanical and anti-corrosive properties, It conforms to the compositional requirements of SSPC paint 20, level 2, and ISO 12944-5.

It provides also Excellent corrosion protection as part of a complete coating system, and excellent adhesion on the properly cleaned surface, this product complies with ASTM D520 type II zinc dust.

• To be used as a primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating, and damaged galvanized steel substrates.

HPoxy 1290 is a two-pack polyamine-cured epoxy resin, it is a surface tolerant, high solids product, high build product, offers excellent resistance against fresh water and seawater, specially designed for areas where optimum surface preparation is not possible or required.

Provides long-lasting protection in environments with high corrosivity. Can be used as a primer, mid-coat, finish coat, or as single-coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanized steel, stainless steel, aluminum, concrete, and a range of aged coating surfaces.

• Surface Tolerant.

• Has excellent abrasion, mechanical and corrosion resistance.

• Can be applied at subzero surface temperatures.

• High build coating and high solid.

HPoxy 1222- EPR Epoxy Sealer is a general purpose, deep penetrating, polyamide epoxy formulation used to prime concrete surfaces prior to the application of the main coating products or systems.

HPoxy 1222 improves the adhesion between substrates and coatings, particularly on difficult surfaces (such as power-floated concrete).

It can also be used to prime for application of epoxy topcoat, polyurethane, polyaspartic and polyurea coatings as well as sealing concrete.

• Deep penetrating formulation – low viscosity

• Fixing and consolidating substrate

• Applicable on a variety of substrates

• Alkali Resistant, Alkaline Silica Resistant (ASR), Acid Resistant

• Creates Moisture Vapor Barrier

• Superior Adhesion and Cohesion with Epoxy, Polyurethane, Polyaspartic or Polyurea Topcoats

• Long-term performance

HPoxy 1221- Epoxy Shop primer is A two-pack, polyamide-cured epoxy resin Low solid epoxy primer with anticorrosive pigments for anti-corrosive paint systems for interior and exterior surfaces, It is a quick-drying shop primer having corrosion prevention properties and can be overcoated after a short interval.

It can serve as a holding primer for renovation. It has excellent adhesion to properly cleaned surfaces.

• Good corrosion prevention properties, quick drying, and short overcoating interval, serve as holding primer for erection period, excellent adhesion.

HPoxy 1218P Epoxy Filler S.F is a two-component High Build Solvent-free Flooring epoxy filler for heavy duty applications based on polyamine-cured epoxy resin, to level and fill cracks before overcoating It can be used on interior and exterior surfaces.

It is very hard and has very good adhesion to the surface. It smoothly covers the surface imperfections and dents, providing a smooth finish.

• Applicable on a variety of substrates

• Superior Adhesion and Cohesion with Epoxy, Polyurethane, poly aspartic

• Long-term performance

HPoxy 1218 is a two-component cycloaliphatic polyamine Solvent Free epoxy Primer, designed for heavy duty industrial floor applications.

HPoxy 1218 dried film has very good sealing properties, leaving a seamless glossy. It is suitable for concrete, steel, metals, and industrial floors.

• Applicable on a variety of substrates

• Alkali Resistant, Alkaline Silica Resistant (ASR), Acid Resistant

• Excellent resistance to water, alkalis and chemicals

• Excellent adhesion to concrete.

• Ideal for heavy traffic areas

• Excellent resistance to mechanical stress.

• Long-term performance